Selamat Datang di Indotrade.com
Masuk | Daftar
Sensorindo.com ( Distributor,  Agent,  Penjualan,  Solusi sensor bagi Anda)

Kistler Acceleration Series

Kistler Acceleration SeriesKami adalah distributor dari alat-alat berupa sensor.

Kunjungi Web kami juga di :http://sensorindo.com
Sensorindo.
Kontak Person:Tasnim (0811 893 101, 08156141954).
Alamat: Jl. Pahlawan Revolusi No. 22B.
Telp. +62-21-8611 131, 8611 259.
Fax : +62-21-8611 207.
EMAIL : sales@sensorindo.com
Website :www.sensorindo.com
Pilih Kotak Centang dan klik   atau   atau 
GaleriBaris
Tampilkan di setiap halaman
Strain sensor for measuring dynamic and quasistatic forces on stationary and moving machinery. The high sensitivity and acceleration-compensated design of the sensor allows....
The 8704B...M10 accelerometer can operate both as a standard low, impedance, voltage mode sensor with a conventional analog output signal or in a digital " PiezoSMART Sensor Mode" ....
Water-cooled precision cylinder pressure sensor with small dimensions, especially suited for small combustion engeniss and for thermodynamic investigations in the laboratory
Water-cooled measuring probe with very small dimensions and M8x0.75 mounting thread, especially suited for use in internal combustion engines with reduced volume and more than 2....
Water-cooled precision pressure sensor specially suited for duty in internal combustion engines for high-precision, thermodynamic measurements .
The 8752A50 and the 8752A50M5 high temperature 165Â ° C version and industrial accelerometers that feature reliability and accuracy characteristics required for use in the most .....
Water-cooled precision cylinder pressure sensor with small dimensions, especially suited for small combustion engines and for thermodynamic investigations in the laboratory
Kistler series 8614A accelerometers are extremely small and light weight and very high resonant frequencies and built-in low impedance Piezotron circuit electronics. Piezotron....
The 8044 accelerometer accurately measures mechanical shock up to 30, 000 g. A stable quartz element allows the unit to undergo high and repeated shock impacts with virtually no....
The 8838 and 8840 are a novel complement of shear mode sensors that are designed to respond to two distinctly different forms of induced oscillations. The internal orientation of....
A unique sensing element construction optimizes the capabilities of this sensor. The result is a device which yields simultaneous dynamic acceleration and force measurements from....
This unique shock accelerometer series incorporates a stable quartz, shear design and are tailored to measure high accelerations from pyroshock to impact testing. The 100 kHz....
The Type 8921 provides an accurate controlled vibration level to verify the sensitivity of vibration sensors or the complete measuring system. The internal control and excitation....
The dynamic response of a mechanical structure while either in a development phase or an actual use environment can readily be determined by impulse force testing. Using an FFT....
The dynamic response of a mechanical structure while either in a development phase or an actual use environment can readily be determinedby impulse force testing. Using an FFT....
The dynamic response of a mechanical structure while either in a development phase or an actual use environment can readily be determined by impulse force testing. Using an FFT....
The 8778A500 and the 8778A500M14 are high frequency, ultra miniature, light weight accelerometers with built-in electronics, providing a low impedance voltage output. Integrated....
The 8764 triaxial accelerometer measures shock and vibration in three orthogonal axes. The + / -500g measuring range accelerometer, weighs only 1.3 grams with a height of 0.2 inches....
High sensitivity triaxial accelerometers that simultaneously measure vibration in three, mutually perpendicular axis ( X, Y and Z) . Designed primarly for modal analysis....
The 8290A25M5 high temperature, triaxial accelerometer is housed in a cube-shaped package with a notched corner to aid in orientation during installation in blind areas. Laser....
The 8710A50 family of low impedance, voltage mode accelerometers are designed for continuous operation in a wide variation of temperature environments. The standard M1 version....
The 8704B5000 accelerometer accurately measures mechanical shock up to 5, 000 g. The unique K-SHEAR sensing system is insensitive to base strain, transverse accelerationand thermal....
The 8702B500 side connector and 8704B500 top connector accelerometer series use a unique shear mode sensing element made of stable quartz crystals. All units are hermetically....
This well documented, easy to read catalogue provides comprehensive information on all Kistler products for the measurement of acceleration. Learn why many users are choosing....
The light weight, low profile 8720A500 uses the K-shear quartz sensing element. Operation in the shear mode reduces sensitivity to thermal transients, base strain and transverse....
The 8712A5M1 is an extremely sensitive accelerometer with 1000 mV/ g sensitivity. It features a rugged all welded, hermetic construction with an electrical ground isolation. The....
The 8732A500 and 8734A500 micro K-Shear accelerometers offer the user a small, lightweight, low profile accelerometer designed for measuring shock and vibration on very small....
The 8730A500 Series are miniature, lightweight accelerometers weighing only 1.9 grams. Only the M1 version, which is slightly larger and " off-ground" ; weights 2.5 grams. These....
The 8728A500 is a miniature, lightweight accelerometer weighing only 1.6 grams. The sensor is constructed in an environmentally sealed, welded, titanium case. A Teflon integral....
The 8632C accelerometer is ideally suited for modal analysis. The convenient cubic configuration provides flexibility for installation. Three surfaces are suited for adhesive....
The 8793A500 triaxial accelerometer family of models measure shock and vibration in three mutually perpendicular axes. They are available in two extended operating temperature....
The 8792A series of quartz shear triaxial accelerometers are rugged, low impedance voltage mode sensors. They are available in four ranges from 25g to 500g with sensitivities from....
The 8791A250 shear triaxial is a low impedance, voltage mode accelerometer in a miniature, cube-shaped enclosure and designed for adhesive mounting. The triaxial design permits....
The 8795A50 is a triaxial family of accelerometers that measure simultaneously shock and vibration in three orthogonal axis. They are available in two extended operating....
The 8794A500 is a triaxial accelerometer that measures shock and vibration in three mutually perpendicular axes. It is designed in a unique flat package and built in a welded, ....
The Kistler Type 8310A K-Beam accelerometer series utilizes a silicon micro-machined variable capacitance sensing element. This high performance, solid state sensor is ideally....
The 8305A K-Beam accelerometer series utilizes a three layer silicon micro-machined variable capacitance sensing element designed for measurements of low level acceleration in a....
Kistler Type 8393A is a precision capacitive silicon micromachined accelerometer for measuring low level, low frequency ( or static) acceleration in three orthogonal axes, ....
The Kistler Type 8330A2.5 Servo K-Beam accelerometer is an analog force feedback sensor incorporating a silicon micro-machined variable capacitance sensing element that provides....
The 8324A K-Beam accelerometer utilizes a variable capacitance sensing element. This high performance accelerometer is ideally suited for applications requiring the measurement of....
The Kistler Type 8312A K-Beam accelerometer series utilizes a silicon micro-machined variable capacitance sensing element. This high performance, solid state sensor is ideally....
The 8630C accelerometers meet requirements for modal analysis. The light weight, five gram design reduces mass loading on light structures, especially when multiple units are used....
The 8690C series of PiezoSMART accelerometers simultaneously measures vibration in three, mutually perpendicular axes ( x, y and z) . They feature high sensitivity and can operate....
The 8772A...M10 accelerometer can operate both as a standard low impedance, voltage mode sensor with a conventional analog output signal or in a digital " PiezoSMART Sensor Mode" ....
A ceramic shear designed triaxial accelerometer with TEDS Smart Sensor operating capability simultaneously measures vibration in three, mutually perpendicular asix ( x, y and z) .....
The 8798A series of PiezoSMART accelerometers simultaneously measures vibration in three, mutually perpendicular axes ( x, y and z) . The unique annular, ceramic shear sensor design....
The 8795A50M10 PiezoSMART accelerometer simultaneously measures shock and vibration in three orthogonal axis. The accelerometer features high sensitivity and can coperate both as....
The 8793A500M10 PiezoSMART accelerometer simultaneously measures vibration and shock in three, mutually perpendicular axes ( x, y and z) . The K-Shear quartz sensing elements....
menampilkan 1-48 dari 57 | Pertama | Sebelum | 1 | 2 | Berikut | Terakhir
Anda mendapat [3] permintaan baru. Ke Menu Anggota © 2024 Indotrade.com. Hak Cipta Dilindungi Undang-undang.