Elcometer 207 Precision Ultrasonic Gauges

Jumlah Pesanan:

The Elcometer 207 series of Precision Ultrasonic Thickness Gauges is designed to provide accurate measurements on thin materials.

All Elcometer 207 and 207DL gauges also have the special PLAS mode. This is specifically designed to provide accurate readings when measuring thin plastics.

Using the latest transducer designs, the Elcometer 207 gauges can accurately measure material thickness from 0.15 - 25.4mm ( 0.006-1� ) without the need to change the measurement mode.

Elcometer 207DL only - ElcoMasterâ„¢

Measurement Modes

Interface-to-Echo Mode: The standard method for measuring material thicknesses from 1.65mm to 25.4mm ( 0.065 to 1.00� ) .
Echo-to-Echo Mode: Measuring materials as thin as 0.15mm ( 0.006� ) the Echo-to-Echo mode ignores the thickness of any coating applied to the surface under inspection.
PLAS Mode: A mode specifically used for measuring very thin plastics. A special graphite delay line accessory is required for this mode.
Differential Mode: Set an acceptable thickness ( nominal) value in the gauge and the unit will display the positive or negative ( ± ) difference from the nominal value entered.
Alarm Mode: Once a minimum acceptable thickness has been set, a red LED illuminates and a buzzer sounds if a measurement falls below the preset value.

Kenalkan ke teman Anda